Easy way to get rid of the dots that scandir() picks up in Linux environments:
<?php
$directory = '/path/to/my/directory';
$scanned_directory = array_diff(scandir($directory), array('..', '.'));
?>
scandir
(PHP 5, PHP 7)
scandir — List files and directories inside the specified path
Description
scandir
( string
$directory
[, int $sorting_order = SCANDIR_SORT_ASCENDING
[, resource $context
]] ) : array
Returns an array of files and directories from the
directory.
Parameters
-
directory -
The directory that will be scanned.
-
sorting_order -
By default, the sorted order is alphabetical in ascending order. If the optional
sorting_orderis set toSCANDIR_SORT_DESCENDING, then the sort order is alphabetical in descending order. If it is set toSCANDIR_SORT_NONEthen the result is unsorted. -
context -
For a description of the
contextparameter, refer to the streams section of the manual.
Return Values
Returns an array of filenames on success, or FALSE on
failure. If directory is not a directory, then
boolean FALSE is returned, and an error of level
E_WARNING is generated.
Changelog
| Version | Description |
|---|---|
| 5.4.0 |
sorting_order constants
were added. Any nonzero value caused descending order in previous versions. So
for all PHP versions, use 0 for ascending order, and 1
for descending order. An option for SCANDIR_SORT_NONE behavior did not
exist prior to PHP 5.4.0.
|
Examples
Example #1 A simple scandir() example
<?php
$dir = '/tmp';
$files1 = scandir($dir);
$files2 = scandir($dir, 1);
print_r($files1);
print_r($files2);
?>
The above example will output something similar to:
Array
(
[0] => .
[1] => ..
[2] => bar.php
[3] => foo.txt
[4] => somedir
)
Array
(
[0] => somedir
[1] => foo.txt
[2] => bar.php
[3] => ..
[4] => .
)
Notes
Tip
A URL can be used as a filename with this function if the fopen wrappers have been enabled. See fopen() for more details on how to specify the filename. See the Supported Protocols and Wrappers for links to information about what abilities the various wrappers have, notes on their usage, and information on any predefined variables they may provide.
add a note
User Contributed Notes 47 notes
dwieeb at gmail dot com ¶
7 years ago
mmda dot nl at gmail dot com ¶
6 years ago
Here is my 2 cents. I wanted to create an array of my directory structure recursively. I wanted to easely access data in a certain directory using foreach. I came up with the following:
<?php
function dirToArray($dir) {
$result = array();
$cdir = scandir($dir);
foreach ($cdir as $key => $value)
{
if (!in_array($value,array(".","..")))
{
if (is_dir($dir . DIRECTORY_SEPARATOR . $value))
{
$result[$value] = dirToArray($dir . DIRECTORY_SEPARATOR . $value);
}
else
{
$result[] = $value;
}
}
}
return $result;
}
?>
Output
Array
(
[subdir1] => Array
(
[0] => file1.txt
[subsubdir] => Array
(
[0] => file2.txt
[1] => file3.txt
)
)
[subdir2] => Array
(
[0] => file4.txt
}
)
info at remark dot no ¶
1 year ago
Someone wrote that array_slice could be used to quickly remove directory entries "." and "..". However, "-" is a valid entry that would come before those, so array_slice would remove the wrong entries.
eep2004 at ukr dot net ¶
4 years ago
Fastest way to get a list of files without dots.
<?php
$files = array_slice(scandir('/path/to/directory/'), 2);
gambit_642 AT hotmailDOTcom ¶
5 years ago
Needed something that could return the contents of single or multiple directories, recursively or non-recursively,
for all files or specified file extensions that would be
accessible easily from any scope or script.
And I wanted to allow overloading cause sometimes I'm too lazy to pass all params.
<?php
class scanDir {
static private $directories, $files, $ext_filter, $recursive;
// ----------------------------------------------------------------------------------------------
// scan(dirpath::string|array, extensions::string|array, recursive::true|false)
static public function scan(){
// Initialize defaults
self::$recursive = false;
self::$directories = array();
self::$files = array();
self::$ext_filter = false;
// Check we have minimum parameters
if(!$args = func_get_args()){
die("Must provide a path string or array of path strings");
}
if(gettype($args[0]) != "string" && gettype($args[0]) != "array"){
die("Must provide a path string or array of path strings");
}
// Check if recursive scan | default action: no sub-directories
if(isset($args[2]) && $args[2] == true){self::$recursive = true;}
// Was a filter on file extensions included? | default action: return all file types
if(isset($args[1])){
if(gettype($args[1]) == "array"){self::$ext_filter = array_map('strtolower', $args[1]);}
else
if(gettype($args[1]) == "string"){self::$ext_filter[] = strtolower($args[1]);}
}
// Grab path(s)
self::verifyPaths($args[0]);
return self::$files;
}
static private function verifyPaths($paths){
$path_errors = array();
if(gettype($paths) == "string"){$paths = array($paths);}
foreach($paths as $path){
if(is_dir($path)){
self::$directories[] = $path;
$dirContents = self::find_contents($path);
} else {
$path_errors[] = $path;
}
}
if($path_errors){echo "The following directories do not exists<br />";die(var_dump($path_errors));}
}
// This is how we scan directories
static private function find_contents($dir){
$result = array();
$root = scandir($dir);
foreach($root as $value){
if($value === '.' || $value === '..') {continue;}
if(is_file($dir.DIRECTORY_SEPARATOR.$value)){
if(!self::$ext_filter || in_array(strtolower(pathinfo($dir.DIRECTORY_SEPARATOR.$value, PATHINFO_EXTENSION)), self::$ext_filter)){
self::$files[] = $result[] = $dir.DIRECTORY_SEPARATOR.$value;
}
continue;
}
if(self::$recursive){
foreach(self::find_contents($dir.DIRECTORY_SEPARATOR.$value) as $value) {
self::$files[] = $result[] = $value;
}
}
}
// Return required for recursive search
return $result;
}
}
?>
Usage:
scanDir::scan(path(s):string|array, [file_extensions:string|array], [subfolders?:true|false]);
<?php
//Scan a single directory for all files, no sub-directories
$files = scanDir::scan('D:\Websites\temp');
//Scan multiple directories for all files, no sub-dirs
$dirs = array(
'D:\folder';
'D:\folder2';
'C:\Other';
);
$files = scanDir::scan($dirs);
// Scan multiple directories for files with provided file extension,
// no sub-dirs
$files = scanDir::scan($dirs, "jpg");
//or with an array of extensions
$file_ext = array(
"jpg",
"bmp",
"png"
);
$files = scanDir::scan($dirs, $file_ext);
// Scan multiple directories for files with any extension,
// include files in recursive sub-folders
$files = scanDir::scan($dirs, false, true);
// Multiple dirs, with specified extensions, include sub-dir files
$files = scanDir::scan($dirs, $file_ext, true);
?>
Tom ¶
4 years ago
Just was curious to count files and lines in a project
<?php
function DirLineCounter( $dir , $result = array('lines_html' => false, 'files_count' => false, 'lines_count' => false ), $complete_table = true )
{
$file_read = array( 'php', 'html', 'js', 'css' );
$dir_ignore = array();
$scan_result = scandir( $dir );
foreach ( $scan_result as $key => $value ) {
if ( !in_array( $value, array( '.', '..' ) ) ) {
if ( is_dir( $dir . DIRECTORY_SEPARATOR . $value ) ) {
if ( in_array( $value, $dir_ignore ) ) {
continue;
}
$result = DirLineCounter( $dir . DIRECTORY_SEPARATOR . $value, $result, false );
}
else {
$type = explode( '.', $value );
$type = array_reverse( $type );
if( !in_array( $type[0], $file_read ) ) {
continue;
}
$lines = 0;
$handle = fopen( $dir . DIRECTORY_SEPARATOR . $value, 'r' );
while ( !feof( $handle ) ) {
if ( is_bool( $handle ) ) {
break;
}
$line = fgets( $handle );
$lines++;
}
fclose( $handle );
$result['lines_html'][] = '<tr><td>' . $dir . '</td><td>' . $value . '</td><td>' . $lines . '</td></tr>';
$result['lines_count'] = $result['lines_count'] + $lines;
$result['files_count'] = $result['files_count'] + 1;
}
}
}
if ( $complete_table ) {
$lines_html = implode('', $result['lines_html']) . '<tr><td></td><td style="border: 1px solid #222">Files Total: ' . $result['files_count'] . '</td><td style="border: 1px solid #222">Lines Total: ' . $result['lines_count'] . '</td></tr>';
return '<table><tr><td style="width: 60%; background-color:#ddd;">Dir</td><td style="width: 30%; background-color:#ddd;">File</td><td style="width: 10%; background-color:#ddd;">Lines</td></tr>' . $lines_html . '</table>';
}
else {
return $result;
}
}
echo DirLineCounter( '.' );
?>
kodlee at kodleeshare dot net ¶
7 years ago
I needed to find a way to get the full path of all files in the directory and all subdirectories of a directory.
Here's my solution: Recursive functions!
<?php
function find_all_files($dir)
{
$root = scandir($dir);
foreach($root as $value)
{
if($value === '.' || $value === '..') {continue;}
if(is_file("$dir/$value")) {$result[]="$dir/$value";continue;}
foreach(find_all_files("$dir/$value") as $value)
{
$result[]=$value;
}
}
return $result;
}
?>
carneiro at isharelife dot com dot br ¶
7 years ago
<?php
/**
* Get an array that represents directory tree
* @param string $directory Directory path
* @param bool $recursive Include sub directories
* @param bool $listDirs Include directories on listing
* @param bool $listFiles Include files on listing
* @param regex $exclude Exclude paths that matches this regex
*/
function directoryToArray($directory, $recursive = true, $listDirs = false, $listFiles = true, $exclude = '') {
$arrayItems = array();
$skipByExclude = false;
$handle = opendir($directory);
if ($handle) {
while (false !== ($file = readdir($handle))) {
preg_match("/(^(([\.]){1,2})$|(\.(svn|git|md))|(Thumbs\.db|\.DS_STORE))$/iu", $file, $skip);
if($exclude){
preg_match($exclude, $file, $skipByExclude);
}
if (!$skip && !$skipByExclude) {
if (is_dir($directory. DIRECTORY_SEPARATOR . $file)) {
if($recursive) {
$arrayItems = array_merge($arrayItems, directoryToArray($directory. DIRECTORY_SEPARATOR . $file, $recursive, $listDirs, $listFiles, $exclude));
}
if($listDirs){
$file = $directory . DIRECTORY_SEPARATOR . $file;
$arrayItems[] = $file;
}
} else {
if($listFiles){
$file = $directory . DIRECTORY_SEPARATOR . $file;
$arrayItems[] = $file;
}
}
}
}
closedir($handle);
}
return $arrayItems;
}
?>
fazle dot elahee at gmail dot com ¶
7 years ago
/**
* This function will scan all files recursively in the sub-folder and folder.
*
* @author Fazle Elahee
*
*/
function scanFileNameRecursivly($path = '', &$name = array() )
{
$path = $path == ''? dirname(__FILE__) : $path;
$lists = @scandir($path);
if(!empty($lists))
{
foreach($lists as $f)
{
if(is_dir($path.DIRECTORY_SEPARATOR.$f) && $f != ".." && $f != ".")
{
scanFileNameRecursivly($path.DIRECTORY_SEPARATOR.$f, &$name);
}
else
{
$name[] = $path.DIRECTORY_SEPARATOR.$f;
}
}
}
return $name;
}
$path = "/var/www/SimplejQueryDropdowns";
$file_names = scanFileNameRecursivly($path);
echo "<pre>";
var_dump($file_names);
echo "</pre>";
telefoontoestel59 at hotmail dot com ¶
4 years ago
I was looking for an easy way to get only files from a certain directory. I came up with the following line of code that will result in an array listing only files. the samen can be done for directories ofcourse.
<?php
$files = array_filter(scandir($directory), function($file) { return is_file($file); })
?>
magicmind at netcabo dot pt ¶
10 years ago
Hello all,
I just added a extension filter to the getDirectoryTree function, so it can filter an extension for files in the folders/subfolders:
<?php
function getDirectoryTree( $outerDir , $x){
$dirs = array_diff( scandir( $outerDir ), Array( ".", ".." ) );
$dir_array = Array();
foreach( $dirs as $d ){
if( is_dir($outerDir."/".$d) ){
$dir_array[ $d ] = getDirectoryTree( $outerDir."/".$d , $x);
}else{
if (($x)?ereg($x.'$',$d):1)
$dir_array[ $d ] = $d;
}
}
return $dir_array;
}
$dirlist = getDirectoryTree('filmes','flv');
?>
fatpratmatt dot at dot gmail dot com ¶
11 years ago
This function generates a list of all files in the chosen directory and all subdirectories, throws them into a NON-multidimentional array and returns them.
Most of the recursive functions on this page only return a multi-dimensional array.
This is actually a modification of some one else's function (thanks mail at bartrail dot de ;])
<?php
function scanDirectories($rootDir, $allData=array()) {
// set filenames invisible if you want
$invisibleFileNames = array(".", "..", ".htaccess", ".htpasswd");
// run through content of root directory
$dirContent = scandir($rootDir);
foreach($dirContent as $key => $content) {
// filter all files not accessible
$path = $rootDir.'/'.$content;
if(!in_array($content, $invisibleFileNames)) {
// if content is file & readable, add to array
if(is_file($path) && is_readable($path)) {
// save file name with path
$allData[] = $path;
// if content is a directory and readable, add path and name
}elseif(is_dir($path) && is_readable($path)) {
// recursive callback to open new directory
$allData = scanDirectories($path, $allData);
}
}
}
return $allData;
}
?>
Example output:
print_r(scanDirectories("www"));
---
Array
(
[0] => www/index.php
[1] => www/admin.php
[3] => www/css/css.css
[4] => www/articles/2007/article1.txt
[4] => www/articles/2006/article1.txt
[8] => www/img/img1.png
)
Nerbert ¶
2 months ago
If you use array_diff() to eliminate "." and ".." you must use array_values() on the result because array_diff() will return an associative array, which may cause problems for a for loop beginning at 0.
$files = array_values(array_diff(scandir($directory), array('..', '.')));
horica78 at yahoo dot com ¶
6 months ago
class file_list{
var $list = array();
function dirr($path){
$arr_dirt = scandir($path);
$j=0;
for($i=0;$i<count($arr_dirt);$i++){
if($arr_dirt[$i] != "." && $arr_dirt[$i] != ".."){
if(is_dir($path."/".$arr_dirt[$i])){
$this->dirr($path."/".$arr_dirt[$i]);
}
else{
$arr_dir[$j++] = $path."/".$arr_dirt[$i];
$this->list[] = $path."/".$arr_dirt[$i];
//
}
}
else{
$arr_dir[$j++] = $path."/".$arr_dirt[$i];//comment if you want only the files
$this->list[] = $path."/".$arr_dirt[$i];
}
}
return $this->list;
}
}
//$arr_dir = dirr("/srv/httpd/htdocs/joomla/webmin-1.610");
//$arr_dir = dirr("C:/php");
//echo "<pre>".print_r($arr_dir,1)."</pre>";
$obj = new file_list();
echo "<pre>".print_r($obj->dirr("C:/php"),1)."</pre>";
artmanniako at gmail dot com ¶
6 months ago
How i solved problem with '.' and '..'
$x = scandir__DIR__; //any directory
foreach ($x as $key => $value) {
if ('.' !== $value && '..' !== $value){
echo $value;
}
}
Simple and working
admin at kmoz000 dot free ¶
1 year ago
function ScaniDir($path){
$ptd= opendir($path);
while (( $ptdf=readdir($ptd))){
$srca = $path.'/'.$ptdf;
if (is_file($srca) and pathinfo($srca, PATHINFO_EXTENSION)=='pdf') {$files['src'][]=$srca;$files['name'][]=explode('.',$ptdf)[0];}
}
return $files ;
}
SPekary ¶
2 years ago
Unless you specify no sorting, file names are sorted in ASCII alphabetic order, meaning numbers first, then uppercase, then lowercase letters, even on operating systems whose file system ignores the case of file names when it does its own sorting.
For example, on Mac OS, the following files will appear in this order in the Finder, when your disk is formated using the standard file system:
1file.php
a.inc
B.txt
c.txt
However, scandir will produce an array in the following order:
1file.php
B.txt
a.inc
c.txt
phpdotnet at lavavortex dot com ¶
10 years ago
How a ninja may retrieve a list of files, files filtered by extension, or directories:
<?php
//NNNIIIinnnjaaa::
//array of files without directories... optionally filtered by extension
function file_list($d,$x){
foreach(array_diff(scandir($d),array('.','..')) as $f)if(is_file($d.'/'.$f)&&(($x)?ereg($x.'$',$f):1))$l[]=$f;
return $l;
}
//NNNIIIinnnjaaa::
//array of directories
function dir_list($d){
foreach(array_diff(scandir($d),array('.','..')) as $f)if(is_dir($d.'/'.$f))$l[]=$f;
return $l;
}
/********************************************************************\
PRETTY PRETTY LIGHTS (DOCUMENTATION)
\********************************************************************/
/********************************************************************
Overloaded PHP file listing function:
array file_list ( string $directory [, string $file_extension] )
$directory
path without backslash, e.g. "/home/public_html/blarg"
$file_extention
optionally filter specific filename extentions, e.g. ".jpg"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> TRANSLATION <<<<<<<<<<<<<<<<<<<<<<<<<<<<
file_list("/home"); //return list of files (no directories)
file_list("/home", ".jpg"); //return only .jpg file list
\********************************************************************/
//(note: one slash (/) below and you enable all your test functions, guess where ;-))
/********************************************************************\
// TEST FUNCTIONS... IF THESE WORK, THIS FUNCTION WORKS ON THIS PLATFORM
echo "<hr><b>File List:</b><br>";
$n = file_list(getcwd());
if($n) foreach($n as $f) echo "$f<br>"; //current files
echo "<hr><b>Files with extension .php:</b><br>";
$n = file_list(getcwd(),".php");
if($n) foreach($n as $f) echo "$f<br>"; //files with .php extensions
echo "<hr><b>Directories:</b><br>";
$d = dir_list(getcwd());
if($d) foreach($d as $f) echo "$f<br>"; //directories
/********************************************************************/
/************\
RUNTIME NOTES:
file_list($arg1); // php issues a warning that there is no second parameter, but we know that, izz ok
\************/
/*******************************\
TESTED AND WORKING ON 2009.04.30:
OS: Linux 2.6.9-78.0.17.ELsmp
APACHE: 2.2.9
PHP: 5.2.5
\*******************************/
?>
progrium+php at gmail dot com ¶
14 years ago
I made this to represent a directory tree in an array that uses the file or directory names as keys and full paths as the value for files. Directories are nested arrays.
<?php
function generatePathTree($rootPath) {
$pathStack = array($rootPath);
$contentsRoot = array();
$contents = &$contentsRoot;
while ($path = array_pop($pathStack)) {
$contents[basename($path)] = array();
$contents = &$contents[basename($path)];
foreach (scandir($path) as $filename) {
if ('.' != substr($filename, 0, 1)) {
$newPath = $path.'/'.$filename;
if (is_dir($newPath)) {
array_push($pathStack, $newPath);
$contents[basename($newPath)] = array();
} else {
$contents[basename($filename)] = $newPath;
}
}
}
}
return $contentsRoot[basename($rootPath)];
}
?>
The function will return something like this:
Array
(
[index.php] => /usr/local/www/index.php
[js] => Array
(
[async.js] => /usr/local/www/js/async.js
[dom.js] => /usr/local/www/js/dom.js
[effects.js] => /usr/local/www/js/effects.js
[prototype.js] => /usr/local/www/js/prototype.js
)
[logo.png] => /usr/local/www/logo.png
[server.php] => /usr/local/www/server.php
[test.js] => /usr/local/www/test.js
)
wwwebdesigner at web doott de ¶
14 years ago
using sort of scandir() that returns the content sorted by Filemodificationtime.
<?php
function scandir_by_mtime($folder) {
$dircontent = scandir($folder);
$arr = array();
foreach($dircontent as $filename) {
if ($filename != '.' && $filename != '..') {
if (filemtime($folder.$filename) === false) return false;
$dat = date("YmdHis", filemtime($folder.$filename));
$arr[$dat] = $filename;
}
}
if (!ksort($arr)) return false;
return $arr;
}
?>
returns false if an error occured
otherwise it returns an array like this.
Array
(
[20040813231320] => DSC00023.JPG
[20040813231456] => DSC00024.JPG
[20040814003728] => MOV00055.MPG
[20040814003804] => DSC00056.JPG
[20040814003946] => DSC00057.JPG
[20040814004030] => DSC00058.JPG
[20040814014516] => DSC00083.JPG
[20050401161718] => album.txt
)
csaba at alum dot mit dot edu ¶
14 years ago
A nice way to filter the files/directories you get back from scandir:
<?php
function pathFilter ($path, $aFilter) {
// returns true iff $path survives the tests from $aFilter
// $aFilter is an array of regular expressions: [-]/regExp/modifiers
// if there is a leading '-' it means exclude $path upon a match (a NOT test)
// If the first expression has a leading '-', $path is in, unless it gets excluded.
// Otherwise, $path is out, unless it gets included via the filter tests.
// The tests are applied in succession.
// A NOT test is applied only if $path is currently (within the tests) included
// Other tests are applied only if $path is currently excluded. Thus,
// array("/a/", "-/b/", "/c/") => passes if $path has a c or if $path has an a but no b
// array("/a/", "/c/", "-/b/") => passes if $path has an a or c, but no b
// array("-/b/", "/a/", "/c/") => passes if $path has no b, or if $path has an a or c
if (!$aFilter) return true; // automatic inclusion (pass) if no filters
foreach ($aFilter as $filter) break; // we don't know how it's indexed
$in = $filter[0]=="-"; // initial in/exclusion based on first filter
foreach ($aFilter as $filter) // walk the filters
if ($in==$not=($filter[0]=="-")) // testing only when necessary
$in ^= preg_match(substr($filter,$not),$path); // flip in/exclusion upon a match
return $in;
}
?>
Csaba Gabor from Vienna
Stan P. van de Burgt ¶
14 years ago
scandir() with regexp matching on file name and sorting options based on stat().
<?php
function myscandir($dir, $exp, $how='name', $desc=0)
{
$r = array();
$dh = @opendir($dir);
if ($dh) {
while (($fname = readdir($dh)) !== false) {
if (preg_match($exp, $fname)) {
$stat = stat("$dir/$fname");
$r[$fname] = ($how == 'name')? $fname: $stat[$how];
}
}
closedir($dh);
if ($desc) {
arsort($r);
}
else {
asort($r);
}
}
return(array_keys($r));
}
$r = myscandir('./book/', '/^article[0-9]{4}\.txt$/i', 'ctime', 1);
print_r($r);
?>
files can be sorted on name and stat() attributes, ascending and descending:
name file name
dev device number
ino inode number
mode inode protection mode
nlink number of links
uid userid of owner
gid groupid of owner
rdev device type, if inode device *
size size in bytes
atime time of last access (Unix timestamp)
mtime time of last modification (Unix timestamp)
ctime time of last inode change (Unix timestamp)
blksize blocksize of filesystem IO *
blocks number of blocks allocated
Patrick ¶
5 years ago
Here is my recursive function, placing directories into new array keys and its contents within.
/* find_files( string, &array )
** Recursive function to return a multidimensional array of folders and files
** that are contained within the directory given
*/
function find_files($dir, &$dir_array)
{
// Create array of current directory
$files = scandir($dir);
if(is_array($files))
{
foreach($files as $val)
{
// Skip home and previous listings
if($val == '.' || $val == '..')
continue;
// If directory then dive deeper, else add file to directory key
if(is_dir($dir.'/'.$val))
{
// Add value to current array, dir or file
$dir_array[$dir][] = $val;
find_files($dir.'/'.$val, $dir_array);
}
else
{
$dir_array[$dir][] = $val;
}
}
}
ksort($dir_array);
}
// Example
$folder_list = array();
find_files('/path', $folder_list)
var_dump($folder_list);
array(3) {
["directory_01"]=>
array(4) {
[0]=>
string(12) "directory_02"
[1]=>
string(12) "directory_03"
[2]=>
string(11) "file_01.txt"
[3]=>
string(11) "file_02.txt"
}
["directory_01/directory_02"]=>
array(2) {
[0]=>
string(11) "file_03.txt"
[1]=>
string(11) "file_04.txt"
}
["directory_01/directory_03"]=>
array(2) {
[0]=>
string(11) "file_05.txt"
[1]=>
string(11) "file_06.txt"
}
}
dsiembab at fullchannel dot net ¶
10 years ago
Back in the saddle of scandir I wrote this function for a function that I needed to seperate directories from files. Since I am still learning from my last example way below I would figure I would add it so it can be criticized.
<?php
function dirlist($dir, $bool = "dirs"){
$truedir = $dir;
$dir = scandir($dir);
if($bool == "files"){ // dynamic function based on second pram
$direct = 'is_dir';
}elseif($bool == "dirs"){
$direct = 'is_file';
}
foreach($dir as $k => $v){
if(($direct($truedir.$dir[$k])) || $dir[$k] == '.' || $dir[$k] == '..' ){
unset($dir[$k]);
}
}
$dir = array_values($dir);
return $dir;
}
?>
<?php
print_r(dirlist("../")); //confirm array of subdirectories
print_r(dirlist("../", "files") // confirm list on files in the directory
?>
simon dot riget at gmail dot com ¶
3 years ago
This is a simple and versatile function that returns an array tree of files, matching wildcards:
<?php
// List files in tree, matching wildcards * and ?
function tree($path){
static $match;
// Find the real directory part of the path, and set the match parameter
$last=strrpos($path,"/");
if(!is_dir($path)){
$match=substr($path,$last);
while(!is_dir($path=substr($path,0,$last)) && $last!==false)
$last=strrpos($path,"/",-1);
}
if(empty($match)) $match="/*";
if(!$path=realpath($path)) return;
// List files
foreach(glob($path.$match) as $file){
$list[]=substr($file,strrpos($file,"/")+1);
}
// Process sub directories
foreach(glob("$path/*", GLOB_ONLYDIR) as $dir){
$list[substr($dir,strrpos($dir,"/",-1)+1)]=tree($dir);
}
return @$list;
}
?>
2bbasic at gmail dot com ¶
7 years ago
<?php
//-- Directory Navigation with SCANDIR
//--
//-- optional placemenet
$exclude_list = array(".", "..", "example.txt");
if (isset($_GET["dir"])) {
$dir_path = $_SERVER["DOCUMENT_ROOT"]."/".$_GET["dir"];
}
else {
$dir_path = $_SERVER["DOCUMENT_ROOT"]."/";
}
//-- until here
function dir_nav() {
global $exclude_list, $dir_path;
$directories = array_diff(scandir($dir_path), $exclude_list);
echo "<ul style='list-style:none;padding:0'>";
foreach($directories as $entry) {
if(is_dir($dir_path.$entry)) {
echo "<li style='margin-left:1em;'>[`] <a href='?dir=".$_GET["dir"].$entry."/"."'>".$entry."</a></li>";
}
}
echo "</ul>";
//-- separator
echo "<ul style='list-style:none;padding:0'>";
foreach($directories as $entry) {
if(is_file($dir_path.$entry)) {
echo "<li style='margin-left:1em;'>[ ] <a href='?file=".$_GET["dir"].$entry."'>".$entry."</a></li>";
}
}
echo "</ul>";
}
dir_nav();
//-- optional placement
if (isset($_GET["file"])) {
echo "<div style='margin:1em;border:1px solid Silver;'>";
highlight_file($dir_path.$_GET['file']);
echo "</div>";
}
//-- until here
//--
//-- Because I love php.net
?>
boen dot robot at gmail dot com ¶
9 years ago
If you have a folder with many files and/or subfolders, doing a recursive scandir will likely either slow down your application, or cause a high rise in RAM consumption due to the large size of the generated array.
To help with this, as well as to make processing of files in a folder easier, I wrote a function that reads a folder and its subfolders recursively, and calls a function upon each match.
<?php
/**
* Calls a function for every file in a folder.
*
* @author Vasil Rangelov a.k.a. boen_robot
*
* @param string $callback The function to call. It must accept one argument that is a relative filepath of the file.
* @param string $dir The directory to traverse.
* @param array $types The file types to call the function for. Leave as NULL to match all types.
* @param bool $recursive Whether to list subfolders as well.
* @param string $baseDir String to append at the beginning of every filepath that the callback will receive.
*/
function dir_walk($callback, $dir, $types = null, $recursive = false, $baseDir = '') {
if ($dh = opendir($dir)) {
while (($file = readdir($dh)) !== false) {
if ($file === '.' || $file === '..') {
continue;
}
if (is_file($dir . $file)) {
if (is_array($types)) {
if (!in_array(strtolower(pathinfo($dir . $file, PATHINFO_EXTENSION)), $types, true)) {
continue;
}
}
$callback($baseDir . $file);
}elseif($recursive && is_dir($dir . $file)) {
dir_walk($callback, $dir . $file . DIRECTORY_SEPARATOR, $types, $recursive, $baseDir . $file . DIRECTORY_SEPARATOR);
}
}
closedir($dh);
}
}
?>
Of course, because it is recursive, a folder with many levels of folders could potentially consume lots of memory, but then again, so can every other recursive scandir implementation here.
BTW, there's also the RecursiveDirectoryIterator SPL class:
http://bg.php.net/manual/en/class.recursivedirectoryiterator.php
which, even if using the same approach, will most likely be faster and hold down deeper levels (because it works on the C level), but this one will always work, regardless of settings... even on PHP4.
Point is, avoid recursive scandir implementations.
moik78 at gmail dot com ¶
9 years ago
This is a function to count the number of files of a directory
<?php
function countFiles($dir){
$files = array();
$directory = opendir($dir);
while($item = readdir($directory)){
// We filter the elements that we don't want to appear ".", ".." and ".svn"
if(($item != ".") && ($item != "..") && ($item != ".svn") ){
$files[] = $item;
}
}
$numFiles = count($files);
return $numFiles;
}
?>
cHH ¶
11 years ago
Since scandir() returns and array, here is a more concise method of dealing with the '.' and '..' problem when listing directories:
<?php
$target = '/';
$weeds = array('.', '..');
$directories = array_diff(scandir($target), $weeds);
foreach($directories as $value)
{
if(is_dir($target.$value))
{
echo $value.'<br />';
}
}
?>
beingmrkenny at gmail dot com ¶
13 years ago
I wrote this function to read a folder and place all the folders and sub folders it contains into an array.
<?php
// Initialise empty array, otherwise an error occurs
$folders = array();
function recursive_subfolders($folders) {
// Set path here
$path = '/path/to/folder';
// Create initial "Folders" array
if ($dir = opendir($path)) {
$j = 0;
while (($file = readdir($dir)) !== false) {
if ($file != '.' && $file != '..' && is_dir($path.$file)) {
$j++;
$folders[$j] = $path . $file;
}
}
}
closedir($dir);
// Then check each folder in that array for subfolders and add the subfolders to the "Folders" array.
$j = count($folders);
foreach ($folders as $folder) {
if ($dir = opendir($folder)) {
while (($file = readdir($dir)) !== false) {
$pathto = $folder. '/' . $file;
if ($file != '.' && $file != '..' && is_dir($pathto) && !in_array($pathto, $folders)) {
$j++;
$folders[$j] = $pathto;
$folders = recursive_subfolders($folders);
}
}
}
closedir($dir);
}
sort($folders);
return $folders;
}
$folders = recursive_subfolders($folders);
?>
$folders now contains an array with the full paths to each subfolder. E.g.:
Array
(
[0] => /path/to/folder/dir1
[1] => /path/to/folder/dir1/subdir
[2] => /path/to/folder/dir1/subdir/subsubdir
[3] => /path/to/dolfer/dir2
)
This function has only been tested on Linux.
csaba at alum dot mit dot edu ¶
14 years ago
Scandir on steroids:
For when you want to filter your file list, or only want to list so many levels of subdirectories...
<?php
function dirList($path="", $types=2, $levels=1, $aFilter=array()) {
// returns an array of the specified files/directories
// start search in $path (defaults to current working directory)
// return $types: 2 => files; 1 => directories; 3 => both;
// $levels: 1 => look in the $path only; 2 => $path and all children;
// 3 => $path, children, grandchildren; 0 => $path and all subdirectories;
// less than 0 => complement of -$levels, OR everything starting -$levels down
// e.g. -1 => everthing except $path; -2 => all descendants except $path + children
// Remaining argument(s) is(are) a filter array(list) of regular expressions which operate on the full path.
// First character (before the '/' of the regExp) '-' => NOT.
// First character (after a possible '-') 'd' => apply to directory name
// The filters may be passed in as an array of strings or as a list of strings
// Note that output directories are prefixed with a '*' (done in the line above the return)
$dS = DIRECTORY_SEPARATOR;
if (!($path = realpath($path?$path:getcwd()))) return array(); // bad path
// next line rids terminating \ on drives (works since c: == c:\ on PHP). OK in *nix?
if (substr($path,-1)==$dS) $path = substr($path,0,-1);
if (is_null($types)) $types = 2;
if (is_null($levels)) $levels = 1;
if (is_null($aFilter)) $aFilter=array();
// last argument may be passed as a list or as an array
$aFilter = array_slice(func_get_args(),3);
if ($aFilter && gettype($aFilter[0])=="array") $aFilter=$aFilter[0];
$adFilter = array();
// now move directory filters to separate array:
foreach ($aFilter as $i=>$filter) // for each directory filter...
if (($pos=stripos(" $filter","d")) && $pos<3) { // next line eliminates the 'd'
$adFilter[] = substr($filter,0,$pos-1) . substr($filter,$pos);
unset($aFilter[$i]); }
$aFilter = array_merge($aFilter); // reset indeces
$aRes = array(); // results, $aAcc is an Accumulator
$aDir = array($path); // dirs to check
for ($i=$levels>0?$levels++:-1;($aAcc=array())||$i--&&$aDir;$aDir=$aAcc)
while ($dir = array_shift($aDir))
foreach (scandir ($dir) as $fileOrDir)
if ($fileOrDir!="." && $fileOrDir!="..") {
if ($dirP = is_dir ($rp="$dir$dS$fileOrDir"))
if (pathFilter("$rp$dS", $adFilter))
$aAcc[] = $rp;
if ($i<$levels-1 && ($types & (2-$dirP)))
if (pathFilter($rp, $aFilter))
$aRes[] = ($dirP?"*":"") . $rp; }
return $aRes;
}
?>
example usage:
<?php
define ("_", NULL);
// this will find all non .jpg, non .Thumbs.db files under c:\Photo
$aFiles = dirList('c:\Photo', _, 0, '-/\.jpg$/i', '-/\\\\Thumbs.db$/');
$aFiles = dirList(); // find the files in the current directory
// next lines will find .jpg files in non Photo(s) subdirectories, excluding Temporary Internet Files
set_time_limit(60); // iterating from the top level can take a while
$aFiles = dirList("c:\\", _, 0, '/\.jpg$/i', '-d/\\\\Photos?$/i', '-d/Temporary Internet/i');
?>
Note that this function will consume a lot of time if scanning large
directory structures (which is the reason for the '[-]d/.../' filters).
Csaba Gabor from Vienna
hex at mail dot nnov dot ru ¶
6 years ago
// Extreme minimal version recursive scan:
function rscandir($dir){
$dirs = array_fill_keys( array_diff( scandir( $dir ), array( '.', '..' ) ), array());
foreach( $dirs as $d => $v )
if( is_dir($dir."/".$d) )
$dirs[$d] = rscandir($dir."/".$d);
return $dirs;
}
phpnet at novaclic dot com ¶
9 years ago
Was looking for a simple way to search for a file/directory using a mask. Here is such a function.
By default, this function will keep in memory the scandir() result, to avoid scaning multiple time for the same directory.
Requires at least PHP5.
<?php
function sdir( $path='.', $mask='*', $nocache=0 ){
static $dir = array(); // cache result in memory
if ( !isset($dir[$path]) || $nocache) {
$dir[$path] = scandir($path);
}
foreach ($dir[$path] as $i=>$entry) {
if ($entry!='.' && $entry!='..' && fnmatch($mask, $entry) ) {
$sdir[] = $entry;
}
}
return ($sdir);
}
?>
Pawel Dlugosz ¶
14 years ago
For directory containing files like (for example) -.jpg the results of scandir are a little "weird" ;)
<?php
$dir = '/somedir';
$files = scandir($dir);
print_r($files);
?>
Array
(
[0] => -.jpg
[1] => .
[2] => ..
[3] => foo.txt
[4] => somedir
)
Beware - sorting is in ASCII order :)
asamir at asamir dot net ¶
11 years ago
This is a modification of scanDirectories function that generates a list of all files in the chosen directory and all subdirectories of specific extentions $allowext
<?php
function scanDirectories($rootDir, $allowext, $allData=array()) {
$dirContent = scandir($rootDir);
foreach($dirContent as $key => $content) {
$path = $rootDir.'/'.$content;
$ext = substr($content, strrpos($content, '.') + 1);
if(in_array($ext, $allowext)) {
if(is_file($path) && is_readable($path)) {
$allData[] = $path;
}elseif(is_dir($path) && is_readable($path)) {
// recursive callback to open new directory
$allData = scanDirectories($path, $allData);
}
}
}
return $allData;
}
$rootDir = "www";
$allowext = array("zip","rar","html");
$files_array = scanDirectories($rootDir,$allowext);
print_r($files_array);
?>
deryckchan at gmail dot com ¶
12 years ago
Bear in mind that sorting is *always* performed when scandir() is called. String sorting takes O(|s|n log n) runtime, and this adds to the burden of the server's memory and processing power.
Therefore, whenever the alphabetical order of the directory content is unimportant, especially if sorting is to be performed by another order, or the natural order of the files on the filesystem is to be utilized, the use of opendir(), readdir() and closedir() combined is always preferred to scandir().
faruk at pamukbilisim dot com ¶
6 years ago
<?php
// Directory Name
$dir = "messages";
// Directory Control
if ( !is_dir( $dir ) ) { die( "File <b>\" {$dir} \"</b> Not Found" ); }
// Optional
chmod( $dir, "0777" );
// Print
print_r( scandir( $dir . "/" ) );
?>
Gerjoo at gmail dot com ¶
8 years ago
If you wish to sort by folders first then files, you could use something like this:
<?php
function scandirSorted($path) {
$sortedData = array();
foreach(scandir($path) as $file) {
if(is_file($path . $file)) {
array_push($sortedData, $file);
} else {
array_unshift($sortedData, $file);
}
}
return $sortedData;
}
?>
NB.: This approach *might* be suboptimal for high performance situations.
- Gerard
webmaster at asylum-et dot com ¶
11 years ago
<?php
/**
* outputs all files and directories
* recursively starting with the given
* $base path. This function is a combination
* of some of the other snips on the php.net site.
* All are good but lacked one thing or another
* that I needed like .htaccess
* files get excluded with the one that checks to
* see if the first character is a . and omits
* that.
*
* @example rscandir(dirname(__FILE__).'/'));
* @param string $base
* @param array $omit
* @param array $data
* @return array
*/
function rscandir($base='', &$data=array()) {
$array = array_diff(scandir($base), array('.', '..')); # remove ' and .. from the array */
foreach($array as $value) : /* loop through the array at the level of the supplied $base */
if (is_dir($base.$value)) : /* if this is a directory */
$data[] = $base.$value.'/'; /* add it to the $data array */
$data = rscandir($base.$value.'/', $data); /* then make a recursive call with the
current $value as the $base supplying the $data array to carry into the recursion */
elseif (is_file($base.$value)) : /* else if the current $value is a file */
$data[] = $base.$value; /* just add the current $value to the $data array */
endif;
endforeach;
return $data; // return the $data array
}
echo '<pre>'; var_export(rscandir(dirname(__FILE__).'/')); echo '</pre>';
/*
Output:
array (
0 => '/path/to/web/.htaccess',
1 => '/path/to/web/foo/',
2 => '/path/to/web/foo/file.txt'
)
*/
?>
SlowWalkere at gmail dot com ¶
11 years ago
Just noticed a minor difference between scandir and readdir.
When opening a directory and using readdir(), each file appears to be accessed in the process. This resets the "Last Accessed" time that you would get with fileatime().
With scandir(), the list is created and none of the files are accessed. Therefore the access times remain unchanged.
I encountered this while writing a script to scan a directory and delete any file that hadn't been accessed in x time. Kind of defeated the purpose when the directory listing accessed every file...
aryel at redtwilight dot com dot br ¶
12 years ago
This function is similar to scandir, but works in PHP4. It uses readdir to get directory info.
<?php
function php4_scandir($dir,$listDirectories=false, $skipDots=true) {
$dirArray = array();
if ($handle = opendir($dir)) {
while (false !== ($file = readdir($handle))) {
if (($file != "." && $file != "..") || $skipDots == true) {
if($listDirectories == false) { if(is_dir($file)) { continue; } }
array_push($dirArray,basename($file));
}
}
closedir($handle);
}
return $dirArray;
}
?>
Yassin Ezbakhe <yassin88 at gmail dot com> ¶
14 years ago
<?php
/**********************************************
*
* PURPOSE: List files inside the specified path and its
* subdirectories
*
* array scandir_recursive (string dir)
*
* This function will return a multidimensional array
* that represents main folder's tree structure.
* Each folder has its own named array
*
**********************************************/
function scandir_recursive($directory)
{
$folderContents = array();
$directory = realpath($directory).DIRECTORY_SEPARATOR;
foreach (scandir($directory) as $folderItem)
{
if ($folderItem != "." AND $folderItem != "..")
{
if (is_dir($directory.$folderItem.DIRECTORY_SEPARATOR))
{
$folderContents[$folderItem] = scandir_recursive( $directory.$folderItem."\\");
}
else
{
$folderContents[] = $folderItem;
}
}
}
return $folderContents;
}
?>
donovan dot pp at gmail dot com ¶
5 years ago
Non-recursive way (red: FASTER & less memory consumption) to list all directory content :
<?php
function list_directory($dir) {
$file_list = array();
$stack[] = $dir;
while ($stack) {
$current_dir = array_pop($stack);
if ($dh = opendir($current_dir)) {
while (($file = readdir($dh)) !== false) {
if ($file !== '.' AND $file !== '..') {
$current_file = "{$current_dir}/{$file}";
$report = array();
if (is_file($current_file)) {
$file_list[] = "{$current_dir}/{$file}";
} elseif (is_dir($current_file)) {
$stack[] = $current_file;
$file_list[] = "{$current_dir}/{$file}/";
}
}
}
}
}
return $file_list;
}
// usage :
//print_r(list_directory('C:/'));
//print_r(list_directory('C:/Users'));
print_r(list_directory('/var/www'));
?>
robin leffmann ¶
8 years ago
Note that scandir() will enforce alphanumerical sorting on the array it returns. If you wish to reduce CPU overhead by avoiding the sorting, or if you wish to obtain "natural filesystem order" - that is, the order in which the files are found while traversing the filesystem (usually the order in which they were written to the disk) - you need to go back to the PHP4 equivalent of opendir() + readdir().
holdoffhunger at gmail dot com ¶
6 years ago
If you would like to use scandir on the root directory of your server, you would imagine the command to be either scandir("") or scandir("/"), but neither work. However, scandir(".") works perfectly. Use scandir("/") and scandir("..") to poke around the Linuxy areas of your webhost. At least, these are the observations I've made with my own webhost when it comes to root directory scandir.
brodseba at brodseba dot com ¶
14 years ago
This function create a HTML view of a directory. It also look for subdirectory. I use some icon to differ from folders or files. It's also possible to get specific icon for specific file type.
Each entrey is clickable so you can use it to populate a form field.
Have fun!
<?php
function ls_recursive2($dir)
{
if (is_dir($dir))
{
$files = scandir($dir);
foreach ($files as $file)
{
$currentfile = $dir . "/" . $file;
$last_dir = "";
// Calculate they identation.
$count = substr_count($currentfile, '/');
$minus_count = substr_count($_SERVER['DOCUMENT_ROOT'], '/');
$count -= ($minus_count + 2);
for($p = 0; $p < $count; $p++)
{
$last_dir .= " ";
}
if (is_dir($currentfile))
{
if ($file != '.' && $file != '..')
{
$last_dir .= "<img src='images/folder.gif' alt='' align='middle' width='16' height='16' border='0'> <a href=\"javascript:go('" . $currentfile . "')\">". substr($currentfile, strrpos($currentfile, '/')) . "</a><br>";
echo $last_dir;
ls_recursive2($currentfile);
}
}
else
{
$last_dir .= "<img src='images/file.gif' alt='' align='middle' width='16' height='16' border='0'> <a href=\"javascript:go('" . $currentfile . "')\">". substr($currentfile, strrpos($currentfile, '/')) . "</a><br>";
echo $last_dir;
}
}
}
}
?>
virtual at NOSPAM dot lapinbleu dot ch ¶
14 years ago
Since I needed to scan dirs and subdirs and wanted to have files and dirs not in the same var without having to explode it, I did this little function:
<?php
function scan_Dir($directory=NULL)
{
$temp = "";
if ($directory==NULL)
{
$directory = getcwd();
}
$handle = opendir($directory);
while (false !== ($filename = readdir($handle)))
{
if (($filename!=".") AND ($filename!=".."))
{
if (is_dir($directory."/".$filename))
{
$old_directory = $directory;
$directory .= "/".$filename;
$temp = scan_Dir($directory);
$cpt = 0;
while ($cpt<count($temp["filename"]))
{
$arrfiles["path"][] = $directory."/".$temp["filename"][$cpt];
$arrfiles["directory"][] = $directory;
$arrfiles["filename"][] = $temp["filename"][$cpt];
$cpt++;
}
$directory = $old_directory;
}
else
{
$arrfiles["path"][] = $directory."/".$filename;
$arrfiles["directory"][] = $directory;
$arrfiles["filename"][] = $filename;
}
}
}
return $arrfiles;
}
?>
This one seems to work properly and use multidimensional array.
To show your files, just use:
<?php
$dir2scan = "admin";
$yourvar = scan_Dir($dir2scan);
echo $yourvar["path"][0]."<br>"; //Complete path of the file with key 0 (dir + filename)
echo $yourvar["directory"][0]."<br>"; //Directory of the file with key 0
echo $yourvar["filename"][0]."<br>"; //Filename of the file with key 0
?>
Note that the parameter of the function is not necessary. If you don't give any, it will scan from the returned value of getcwd() function.
